Renault Zoe Phase 2 (OBD port)¶
Vehicle Type: RZ2O
This vehicle type supports the Renault Zoe(PH2) e.g ZE50 through OBD connection. All values are read-only, no control possible because of CAN Gateway.
Support Overview¶
| Function | Support Status |
|---|---|
| Hardware | OVMS v3.3 |
| Vehicle Cable | OBD-II to DB9 Data Cable for OVMS (Generic OBD2 Cable (left)) |
| GSM Antenna | 1000500 Open Vehicles OVMS GSM Antenna (or any compatible antenna) |
| GPS Antenna | 1020200 Universal GPS Antenna (SMA Connector) (or any compatible antenna) |
| SOC Display | Yes |
| Range Display | Yes |
| GPS Location | Yes (from modem module GPS) |
| Speed Display | Yes |
| Temperature Display | Yes (Battery, Outside, Cabin, Motor, Inverter, Tyres) |
| BMS v+t Display | Yes |
| TPMS Display Zoe | Yes (Pressure and temperature) |
| Charge Status Display | Yes |
| Charge Interruption Alerts | Yes |
| Charge Control | No (planned, but access to CAN after gw neccessary) |
| Cabin Pre-heat/cool Control | No (planned, but access to CAN after gw neccessary) |
| Lock/Unlock Vehicle | Yes (display only) |
| Valet Mode Control | No |
Others:
| Door open/close | Yes (exclude hood) |
| Battery full charge cycles | Yes |
| Battery max charge, recd pwr | Yes |
| Trip counter from Car | No (was included, but datapoint is extremly unreliable) |
| Battery lifetime gauges | Yes (Charged, Recd and Used kWh) |
| Heat pump power, rpm and hp press. | Yes |
| Aux power gauges | Yes (testing needed) |
| Charge type | Yes (DC charge, testing needed) |
| Headlights Status | Yes (lowbeam) |
| Charge efficiency calculation | Yes (but only for AC, pf is measured with power analyzer and included as statics) |