============================== ChgInd: Charge State Indicator ============================== **Control three LEDs to indicate charging & SOC level** Version 1.0 by Michael Balzer Following an idea by "green_fox" on the german Twizy forum (not limited to the Twizy) to implement an externally visible charge indicator. Use a red, a green and a blue LED to signal charge state: - OFF = not charging - RED = charging, SOC below 20% - YELLOW (RED+GREEN) = charging, SOC 20% … 80% - GREEN = charging, SOC above 80% - BLUE = fully charged (held for 15 minutes) This plugin uses three EGPIO lines to control the three LEDs (KISS). By using a shift register this could be reduced to two lines, by using a serial protocol to one line. The latter would need protocol support in the EGPIO (todo). ------------ Installation ------------ 1. Save :download:`chgind.js` as ``/store/scripts/lib/chgind.js`` 2. Add line to ``/store/scripts/ovmsmain.js``: - ``chgind = require("lib/chgind");`` 3. Issue ``script reload`` or evaluate the ``require`` line ------------- Configuration ------------- .. code-block:: none // EGPIO ports to use: const LED_red = 4; // EIO_3 const LED_green = 5; // EIO_4 const LED_blue = 6; // EIO_5 // Time to hold BLUE state after charge stop: const holdTimeMinutes = 15; ---------- Plugin API ---------- .. code-block:: none chgind.set(state) -- set LED state ('off'/'red'/'yellow'/'green'/'blue')