Renault Twizy

Vehicle Type: RT

Support Overview

Function

Support Status

Hardware

No specific requirements (except for regen brake light control, see below)

Vehicle Cable

OBD-II to DB9 Data Cable for OVMS (1441200 right, or 1139300 left)

GSM Antenna

1000500 Open Vehicles OVMS GSM Antenna (or any compatible antenna)

GPS Antenna

1020200 Universal GPS Antenna (SMA Connector) (or any compatible antenna)

SOC Display

Yes

Range Display

Yes

GPS Location

Yes

Speed Display

Yes

Temperature Display

Yes

BMS v+t Display

Yes

TPMS Display

No

Charge Status Display

Yes

Charge Interruption Alerts

Yes

Charge Control

Current limit, stop, SOC/range limit

Cabin Pre-heat/cool Control

No

Lock/Unlock Vehicle

Mapped to dynamic speed lock

Valet Mode Control

Mapped to odometer based speed lock

Others

  • Battery & motor power & energy monitoring

  • Battery health & capacity

  • SEVCON monitoring & tuning (Note: tuning only SC firmware <= 0712.0002 / ~07/2016)

  • Kickdown

  • Auto power adjust

  • Regen brake light

  • Extended trip & GPS logging

Note: regarding the Twizy, V3 works very similar to V2. All telemetry data tables and tuning profiles are fully compatible, and the commands are very similar. Therefore, the basic descriptions and background info from the V2 manual are valid for V3 as well.

Hints on V3 commands vs. V2

  • V3 commands need to be in lower case.

  • When accessing via USB terminal, first issue enable (login).

  • V3 commands are similar to V2 commands, just structured slightly different.

  • Try help, ? and xrt ?. Twizy commands are subcommands of xrt.

  • TAB only works via USB / SSH. Shortcuts can be used generally, e.g. mo t instead of module tasks.

  • A usage info is shown if a command syntax is wrong or incomplete.

Contents